Scaffolding & Shuttering


MSF Brand Plywood Shuttering Plates


MSF Slab forming system has become safe and faster conception of slan forming methos in just with one system. The advantage of the system is that same components are used for different application in building industry.

Pluywood Shuttering Plates specially designed for P.T. Slabs & Wall forms.

Plywood plates specially designed for P.T. Slab, where in only primary grid is required, secondary grid not required.

High tensile steel fabricated beams are also provided by us. Where it can take load up to 480 MM thick slabs give support @ every 1200 MM CC.

MSF Ply Plates making slab casting Safe & Secure with ultimate finished concrete.


Combination of 1st & 2nd lift


Retaining wall with tie-rod supports


Plywood plates for retaining wall of 50 Mtrs * 7.2 Mtrs height single pour supported by truss and wallers


Retaining Wall One side support without tie rods


Cup Lock Systems


Simple Method of Connection
The principle feature of MSF, is the unique method of connecting horizontal to verticals in one single action without the use of nuts, bolts or edges. the locking device is formed by two cups, a fixed cup which is welded to verticals and a sliding upper cup is moved down and roated by hammer blow to give a positive and rigid connection.

Benefits of Cup-Lock
Strong, Time saving in erection, quick to assemble, Simple to erect, Fully systemiszed, can eliminate tube and loose fittings. Confidence from in-depth technical support.

Cup-Lock verticals are provided in seven basis sizes with cup joints welded at 500 MM or 1000 MM intervals. The captive mobile top cups are malleable casting which endure rough site handling, whilst the fixed bottom cups are pressed from high quality steel

The Cup-Lock system utilizes a carefully selected range of sizes to meet the varied demands of grid in general support of formwork. Many of these can also be used for access structure. Each has forged blade ends with the minimum projection to resist site damage.


Tubular Scaffolding Systems


MSF scaffolding system is manufactured from tested quality of 40 NB steel tubes conforming to ISI specifications. The scaffolding comprises of 2 Mtr. height and 1.25 Mtr. wide welded frame connected. Together by scissor type cross bracing, secured to the frames by ordinary nail available at site and ordinary M.S. bar for locking. Adjustable base is provided to take care of unevenness of ground & adjustable 'U' type stirrup-head for fixing direct into leg of the frame to provide fine vertical adjustment between 75 MM to 500 MM. These frames with 40 M verticals recommended up to 30 Mtr. height for working load.

Floor Form

Floor form centering plates are manufactured out of 2 MM H.R. sheets. They have pressed corners and stiffeners for rough handling on construction site.
Available Size : 600 * 900 MM / 600 * 1150 MM.


Shuttering Systems


Heavy Duty Telescopic Steel Props

MSF : Roll Thread / Cut Thread Props are manufactured from top quality, ERW steel tubes confirming to IS:1161 / 1239 grades YST22. Sturdy 150 * 150 * 6 MM head and foot plates welded on inner of (40 NB) M & Outer (50 NB) M members having matching holes for fastening of props on top of each other to gain additional heights. Nail holes provided on top of each other to gain additional heights. Nail holes provided on Head and Foot plates for nailing runners / bearers on to props.

MSF Props Loading Chart

Size. Minimum Ht. (Mtr.) Maximum Ht. (Mtr.)
Safe Axil Load in Kg.
1 1.10 1.75
2 1.50 2.75
3 2.00 3,25
4 2.00 3.75
5 3.00 4.75

New Prop takes load of 8.5 tonnes extended position & 16 tonnes load in closed position

Adjustable Span

  • Light Weight with total rigidity longer life
  • Eliminates cost of cutting & wastage of timber
  • Cuts labour cost tremendously
  • Gives Excellent concrete finish
  • Compact for storage and transport
Minimum MTR
Maximum MTR